When it comes into contact with water, garnet can be damaged if being in exposure in water for long time. While talking about damage the gemstone, it is important to keep in mind that avoid clean garnet with soapy water and make sure if it happens then dried it off quickly. Keeping for a longer period of time can start a problem.
So, here in this blog, you will get to know about garnet gemstone and why it should not be left in water.
Let’s Jump On The Main Question…
Can Garnet Go In Water or Not?
Yes, but we don't advise doing so! Your gemstone won't be harmed by a little water, but prolonged submersion can cause long-term damage. There are two ways in which this damage may appear:
Structural Damage:
-
Let us explain this by first going over the Mohs mineral hardness scale. German mineralogist and gemologist Fredrich Mohs developed a qualitative ordinal scale in 1822 to assess each gemstone's durability.
-
It was subsequently established that jewels with a higher toughness score—those exceeding five—were less susceptible to water damage.
-
The garnet, with a value of 6.5–7.5, is an excellent illustration of this!
However, this stunning stone contains a number of microscopic surface fissures and flaws, just as other jewels. Water molecules seep into these fissures and enlarge them gradually when submerged over long periods of time. The stone may finally break as a result of this process if it continues for a long time.
Physical Damage:
One fascinating thing to know about garnets is that they are usually polished before being used in designs. Unfortunately, water will remove this polish. This is particularly true if salt or chlorine are added to the liquid. When a jewel is removed, it leaves behind a dull one that detracts from the overall piece's beauty.
After providing an answer to the query, "can garnet go in water?" let's discuss…
How To Keep Garnet In Good Condition?
To clean garnet, adhere to following steps:
-
Combine lukewarm water and a little soap or detergent.
-
Use a gentle brush to scrub garnet after submerging it in the solution.
-
To get rid of any remaining soap, rinse the stone under running water.
Allow it to dry naturally. Make sure you give it a few twists to completely remove any water from the slits.
Please Note That: For garnet, steam cleaning is not advised. The best way to clean a stone is with warm, soapy water; ultrasonic cleaning is generally safe, unless the stone has fractures.
To understand this in other words:
We believe that wiping your garnet jewelry piece with a moist cloth after each use is the best method to keep it in good condition. Having said that, you can give your attachment a quick soak in water for a minute or two if you see that it has a lot of dust and grime on it. After finishing, use a lint-free towel to remove any remaining water and grime, then set the stone aside to airdry.
Throughout the drying process, don't forget to flip your piece a few times to get rid of any water that might have collected in the stone's cracks.
Additional Caring Tips To Take Care Of Your Garnet
Keep your gem out of the sun and warm environments when drying it, since these conditions may cause your stunner to crack or lose color. Moreover, we advise against using steam or ultrasonic cleaners on your gem because they may cause more harm than good.
We recommend expert stone cleaning at least once a year to keep it in excellent condition.
Final Thoughts
Here in this blog, we have discussed about the garnet’s relation in water. Garnet is a rather hard mineral (Mohs Hardness Scale: 6.0–7.5) that can be submerged in water without risk, though not for an extended period of time.
